Water-curtain liquid paint booth
The water-curtain liquid paint booth draws the overspray into a sheet of water running down the back wall. The water carries the paint into a tank below, where it is separated and collected as sludge, and the air passes a mist eliminator on its way to the exhaust fan. There are no filter pads to replace. Booth size and electrical load are set per project from the largest part.
| Overspray capture | Water curtain |
|---|---|
| Paint waste | Collected as sludge |
| Size | Per project |
Technical data
The table shows the standard size. Values marked per project are set from your part and line and appear in the proposal, with the drawing for your size.
Quote for your dimensions| Overspray capture | Water curtain over the full back wall |
|---|---|
| Air cleaning | Mist eliminator behind the curtain |
| Water | Tank under the curtain, circulation pump |
| Paint waste | Separated from the water, collected as sludge |
| Booth size | Per project |
| Electrical load | Per project |
How we size it
Width and depth follow the part and the spray distance, as for the other liquid paint booths, and the curtain runs the full width of the back wall. The booth configurator sizes a water-curtain booth for your part and draws it in 3D.
What it is for
- Large-scale painting with high paint use
- Shops that want no filter pads to replace
- Automotive parts, white goods, metal products and furniture
Options
- Air make-up with heating
- Pass-through layout on a conveyor
- Explosion-proof lighting for solvent-based paints
Standards
ATEX-certified components in the classified zone; CE Declaration of Conformity supplied. Built to EN 16985:2018.
Values marked "Per project" in the table are set from your part and line, and appear in the proposal.
Quote for the water-curtain liquid paint booth
Send the part size, quantity and line speed; we reply within 2 working days.